Length converter
Inches to feet.
Split a long inch reading into whole feet and remaining inches, or keep it as a decimal-foot value.
The marker shows the fractional part of one inch. This diagram illustrates tick positions; it is not a physical-size ruler.
Conversion formula
feet = inches ÷ 12
Enter the source length above. The result updates immediately. These calculations use exact length definitions: 1 m = 100 cm = 1000 mm, 1 in = 25.4 mm, and 1 ft = 12 in. Only the displayed answer and fractional ruler mark are rounded. The feet-and-inches output splits a length into whole feet and remaining inches; decimal feet do not encode an inch count.
Worked example
66 inches is exactly 5.5 ft, or 5 ft 6 in. A reading of 66 3/8 inches becomes 5.53125 ft and means 5 ft 6 3/8 in. Dividing by twelve changes the numerical unit, not the physical length.
Conversion table: in → ft
Select a source value to load it into the calculator. Decimal results are displayed to at most six places; inch fractions in this table are rounded to 1/16 inch.
| Inches (in) | Feet (ft) | Nearest inch fraction |
|---|---|---|
| 0.083333 | ≈ 1 in | |
| 0.5 | ≈ 6 in | |
| 1 | ≈ 12 in | |
| 1.5 | ≈ 18 in | |
| 2 | ≈ 24 in | |
| 2.5 | ≈ 30 in | |
| 3 | ≈ 36 in | |
| 4 | ≈ 48 in | |
| 5 | ≈ 60 in | |
| 5.5 | ≈ 66 in | |
| 6 | ≈ 72 in | |
| 8 | ≈ 96 in |
When to use this conversion
Use this when an instruction lists a long length only in inches but you want a feet-and-inches tape reading. Fractions can be entered directly, including mixed values such as 66 3/8. The whole feet are separated from the remaining inches in the result.
A decimal such as 5.5 ft does not mean 5 ft 5 in. The decimal part is a fraction of twelve inches. Multiply that part by twelve, or use the mixed output provided here. Rounding a fractional inch to a whole inch discards the original ruler detail.
Exact conversion versus a ruler reading
The unit relationship is exact, but a measured object may have uncertainty. At 1/16 inch, the maximum rounding difference is half a tick: 1/32 inch, or 0.79375 mm. The calculator shows the actual rounding difference for your value. Use a finer division only if the source measurement and physical instrument support that precision.
Next steps
Numerical conversion needs no display calibration. Comparing a physical object against your screen does. Use the ruler for small objects, a verified paper ruler away from your display, or an appropriate calibrated instrument for safety-critical measurements.
Related converters
Reference: NIST unit conversion factors. Calculations use the international foot, not historical survey-foot units. Fractions are explicitly approximate. NIST ↗